Assessment of the functionality of a pilot-scale reactor and its potential for electrochemical degradation of calmagite, a sulfonated azo-dye

Electrochemical degradation (ECD) is a promising technology for in situ remediation of diversely contaminated environmental matrices by application of a low level electric potential gradient. This investigation, prompted by successful bench-scale ECD of trichloroethylene, involved development, parametric characterization and evaluation of a pilot-scale electrochemical reactor for degradation of calmagite, a sulfonated azo-dye used as a model contaminant. The reactor has two chambers filled with granulated graphite for electrodes. The system has electrical potential, current, conductivity, pH, temperature, water-level and flow sensors for automated monitoring. The reactor supports outdoor and fail-safe venting, argon purging, temperature regulation and auto-shutdown for safety. Treatment involves recirculating the contaminated solution through the electrode beds at small flow velocities mimicking low fluid-flux in groundwater and submarine sediments. The first phase of the investigation involved testing of the reactor components, its parametric probes and the automated data acquisition system for performance as designed. The results showed hydraulic stability, consistent pH behavior, marginal temperature rise (<5 degrees C) and overall safe and predictable performance under diverse conditions. Near complete removal of calmagite was seen at 3-10V of applied voltage in 8-10h. The effects of voltage and strength of electrolyte on degradation kinetics have been presented. Further, it was observed from the absorption spectra that as calmagite degrades over time, new peaks appear. These peaks were associated with degradation products identified using electrospray ionization mass spectrometry. A reaction mechanism for ECD of calmagite has also been proposed.     

The reuse of reclaimed water for irrigation around the Mediterranean Rim: a step towards a more virtuous cycle?

Regional Environmental Change - Climate change and a growing population around the Mediterranean Rim are increasing the need for water and, consequently, the pressure on resources in terms of both...     

Influences of pH and current on electrolytic dechlorination of trichloroethylene at a granular-graphite packed electrode

Electrolytic dechlorination using a granular-graphite packed cathode is an alternative method for the remediation of chlorinated organic compounds. Its effectiveness under various conditions needs experimental investigation. Dechlorination of trichloroethylene (TCE) was conducted under various conditions in an electrolytic reactor with a platinum-gauze anode and a granular-graphite packed cathode. The higher the applied current, the more TCE was eliminated and more hydrogen and oxygen gasses were generated. Current efficiency decreased with a decrease in TCE concentration during each dechlorination experiment. But, the current efficiency concentration coefficient (CECC), which was defined as current efficiency divided by concentration, was a better indicator of current efficiency. The CECC was not significantly affected by current, but it varied with pH value. The pH effects were results of the involvement of electrolytes in the proton reduction and the electron transfer at the cathode. A lower pH value favored TCE dechlorination in potassium chloride, which is an electrolyte that was not involved in cathode reactions with protons and electrons. In ammonium acetate and potassium nitrate, which involve proton reduction and/or electron transfer, the pH value affected TCE dechlorination through proton limitation and electron competition.     

Arsenic release from iron rich mineral processing waste: Influence of pH and redox potential

This paper presents the effect of pH and redox potential on the potential mobility of arsenic (As) from a contaminated mineral processing waste. The selected waste contained about 0.47 g kg(-1) of As and 66.2 g kg(-1) of iron (Fe). The characteristic of the waste was identified by acid digestion, X-ray diffraction and sequential extraction procedures. Less than 2% of the total As was acid extractable with the remaining 98% associated with Fe-oxyhydroxides and oxides. Batch leaching tests at different pH conditions showed a strong pH dependence on arsenic and iron leaching. Arsenic leaching followed a "V" shaped profiles with significant leaching in the acidic and alkaline pH region. Acid extractable phases dissolved at acidic pH, while desorption of arsenic due to increase in pH resulted in high arsenic concentration at alkaline pH. Under aerobic conditions and pH 7, As solubility was low, probably due to its precipitation on Fe-oxyhydroxides. Maximum As solubilization occurred at pH 11 (3.59 mg l(-1)). Similarity in the As and Fe leaching profiles suggested that the release of As was related to the dissolution of Fe in the low pH region. In general, redox potential did not play a significant role in arsenic or iron solubilization. It was thus concluded that for this solid waste, desorption was the predominant mechanism in arsenic leaching. A simple thermodynamic model based on arsenic and iron redox reactions was developed to identify the more sensitive redox couple.     

Palladium-facilitated electrolytic dechlorination of 2-chlorobiphenyl using a granular-graphite electrode

Palladium-assisted electrocatalytic dechlorination of 2-chlorobiphenyl (2-Cl BP) in aqueous solutions was conducted in a membrane-separated electrochemical reactor with granular-graphite packed electrodes. The dechlorination took place at a granular-graphite cathode while Pd was electro-deposited from the K2PdCl6 in the solution and at a Pd-deposited granular-graphite electrode. Using the Pd-deposited graphite cathode in the membrane reactor for a sequence of experiments, each was conducted under a lower current than in the previous one, and the rate of dechlorination became slower in each consecutive experiment. At the end of this sequence, a duplicate experiment showed a loss of activity of the Pd-deposited granular-graphite cathode. In the experiments of dechlorination while Pd was deposited at the granular-graphite electrode, the rate of dechlorination increased with increases of the initial K2PdCl6 concentration and of the applied cathode potential. In each experiment, the dechlorination of 2-Cl BP was relatively fast at the beginning, as demonstrated in an experiment in which 66.4% of 2-Cl BP was dechlorinated within 4h, but the rate of dechlorination decreased over the time. This decrease can be described with two stages of exponential decrease. The values of the rate constant in the first stage varies with the applied potential and the initial K2PdCl6 concentration, but the values of the rate constant in the second stage do not show any dependence on the potential and the K2PdCl6 concentration. The current efficiency of dechlorination was improved by applying part-time current to the electrodes.     

Relationship between liquid depth and the acoustic generation of hydrogen: design aspect for large cavitational reactors with special focus on the role of the wave attenuation

Understanding the effect of the liquid depth (z) on the acoustic generation of hydrogen is highly required for designing large-scale sonoreactors for hydrogen production because acoustic cavitation is the central event that initiates sonochemical reactions. In this paper, we present a computational analysis of the liquid-depth effect on the generation of H₂ from a reactive acoustic bubble trapped in water irradiated with an attenuating sinusoidal ultrasound wave. The computations were made for different operating conditions of frequency (355–1000 kHz), acoustic intensity (1–5 W/cm²), and liquid temperature (10–30°C). The contribution of the acoustic wave attenuation on the overall effect of depth was appreciated for the different conditions. It was found that the acoustic generation of hydrogen diminished hardly with increasing depth up to z = 8 m, and the depth effect was strongly operating parameter-dependent. The sound wave attenuation played a crucial role in quenching H₂ yield, particularly at higher z. The reduction of the H₂ yield with depth was more pronounced at higher frequency (1000 kHz) and lower temperature (10°C) and acoustic intensity (1 W/cm²). The attenuation of the sound wave may contribute up to 100% in the overall reductive effect of depth toward H₂ production rate. This parameter could be imperatively included when studying all aspects of underwater acoustic cavitation.     

Assessing the chemical behavior and spatial distribution of yttrium and rare earth elements (YREEs) in a coastal aquifer adjacent to the Urmia Hypersaline Lake,NW Iran

This study aims to shed light on the seasonal behavior of yttrium and rare earth elements (YREEs) in the Urmia Aquifer (UA), in the immediate vicinity of Urmia Lake (UL) in Iran. Samples of groundwater, collected under dry and wet conditions in coastal wells of UA, suggest a large degree of variability in both YREE abundance and normalized patterns. Although weathering or water-rock interactions (between the surface/groundwater and rock samples) were predicted to be the most probable source in explaining YREEs in groundwater samples, results to the contrary indicate that the groundwater do not inherit aquifer rock-like YREE signatures in the study area; this might be due to the relative stability of YREEs during the process of water-rock interactions, which suggest that methods based on YREEs can be beneficial in discrimination of water sources. Furthermore, findings demonstrated no significant relationship between Ce/Ce* and salinity (0.08 and 0.05 in wet and dry seasons, respectively), and between Eu/Eu* and salinity (0.1 and ?0.04 in wet and dry seasons, respectively). Dissimilarity of patterns of YREEs in rock and water samples reveals YREEs as no conservative tracers in determining the UL saltwater intrusion into coastal groundwater. Therefore, the groundwater YREE concentrations and fractionation patterns in UA warrant controlling by coastal aquifer need to be controlled by other chemical weathering, adsorption, desorption, and solution complexation reactions. Finally, comparison of REE concentration values in groundwater samples with corresponding indicative admissible drinking water concentrations (IAC) demonstrated their suitability for drinking purposes.

     

ASSESSMENT OF IMPACTS OF CLIMATE CHANGE ON WATER QUALITY IN THE SOUTHEASTERN UNITED STATES1

ABSTRACT: An assessment of current and future water quality conditions in the southeastern United States has been conducted using the EPA BASINS GIS/database system. The analysis has been conducted for dissolved oxygen, total nitrate nitrogen and pH. Future streamflow conditions have been predicted for the region based on the United Kingdom Hadley Center climate model. Thus far, the analyses have been conducted at a fairly coarse spatial scale due to time and resource limitations. Two hydrologic modeling techniques have been employed in future streamflow prediction: a regional stochastic approach and the application of a physically based soil moisture model. The regional model has been applied to the entire area while the physically based model is being used at selected locations to enhance and support the stochastic model. The results of the study reveal that few basins in the southeast exhibit dissolved oxygen problems, but that several watersheds exhibit high nitrogen levels. These basins are located in regions of intense agricultural activity or in proximity to the gulf coast. In many of these areas, streamflow is projected to decline over the next 30–50 years, thus exacerbating these water quality problems.